Estimating and Quantity Takeoff Services by Deliverable
These are different outputs, not renamed copies of one page. Pick the file you need back, then open that scope before you upload drawings. Across these offers, most estimates are typically $150 to $1,000 and the usual turnaround is 24 to 48 hours. The fee follows project size, trades, and plan quality. See what changes the price.
Match the request to the file you will use
| You need | Ask for | You still supply |
|---|---|---|
| Counts your team will price | Quantity takeoff | Labor rates, supplier quotes, and markup |
| A list a supplier can price | Material takeoff | Preferred vendors, pack sizes, and buyout phases |
| A number you will submit as your bid | Bid estimating | Your margin rules and the quotes you want leveled |
| A cost check before the set is finished | Budget estimating | The narrative or partial drawings, and the allowance rules |
| Backup for a revised detail | Change-order estimate | The original issue and the revised sheets |
Quantity Takeoff
Measured counts and lengths with units, sheet references, and listed assumptions. You apply your own prices.
Material Takeoff
The same measurements grouped for a supplier: size, spec, and phase. Ordering waste stays in its own column.
Construction Estimating
Quantities plus the cost basis you agree: labor, equipment, subcontractor quotes, and indirect costs.
Bid Estimating
A proposal package you review and submit under your own name, including subcontractor bid leveling when that is in scope.
Commercial Estimating
Shell, core, and tenant boundaries for offices, retail, and other commercial sets.
Residential Estimating
Custom homes, multifamily, and renovations, with repeated plans kept separate from one-off units.
Industrial Estimating
Steel, civil quantities, industrial slabs, and process pipe counted only where the drawings show them.
Cost Estimating
How rates are attached to quantities, and which rates must come from you or your supplier.
Budget Estimating
Narrative, schematic, and design-development budgets. Missing drawings stay labeled as allowances.
Change Order Estimates
Quantities and cost backup for a revised detail, compared with the original issue when you send both.
Value Engineering
Alternates written against a specific assembly, with what changes in the documents and what does not.
Questions before you pick a scope
Which service should I request?
Request a quantity takeoff when you will price the job. Request a material takeoff when a supplier needs sizes and phases. Request construction or bid estimating when the proposal must also carry costs, and say whose labor rates and subcontractor quotes will be used. Request a budget when the drawing set is incomplete. The quote confirms the choice after the documents are reviewed.
Is an early budget the same page as a finished takeoff?
No. Budget estimating covers narrative, schematic, and design-development information, and it keeps allowances visible. A quantity takeoff measures an issued drawing set. The old preliminary-estimates URL now redirects to the budget page because the two offers described the same early-design work.
Do trade pages replace these services?
Trade guides explain how a division is measured: units, typical assemblies, and review questions. Service pages explain the deliverable. A concrete takeoff can be delivered as quantities only or inside a priced estimate. Say which one you need.
How much does an estimate cost?
Count on $150 to $1,000 for most estimates. That is the typical band per estimate, and a bigger drawing set or a wider scope is what pushes a job toward the top.
How fast can the estimate come back?
Delivery for most estimates is typically 24 to 48 hours.